|
|
Ultimately if the SAPEC 523 treatment does not get into the boiler then it can not achieve results. SERVICE IS THE KEY TO SUCCESS The injection machines have been designed to require little maintenance and are very reliable. However, boiler houses are often inhospitable environments, Feeders can often get sprayed with water, covered in dust or simply switched off by boiler personnel or through power failures in the boiler house. SAPEC employ full and part-time service operators to look after the operation of the feeders. The service operator can regularly visit customers within their region to check the injectors and fill them where necessary. By doing this we can take responsibility for the operation of the injectors away from the customer. This allows SAPEC complete control over the dosage rates and machines, therefore allowing us to guarantee the results. Regular service visits allow us to ensure continuity of supply and allow problems to be quickly solved. Whenever we start with a customer we invariably start the system on one boiler. The duration of the trial is usually mirrors the normal operating time between boiler cleans. If we don’t identify dosage problems quickly then months may be wasted and the whole trial as well as our reputation is then at risk. The KL-90 machine is designed for easy maintenance. The service operators carry interchangeable parts and do not need any special skills, therefore they offer a very cost effective method of covering large areas and are able to ensure that the KL-90 machines are working and that the SAPEC system is providing a benefit to customers. For More Information Contact: |
|
|