|
|
|
 | Fully Automatic |
| Consistent and accurate dosage |
| 90kg to 150 kg capacity of treatment |
| Can inject into pressurized systems |
|
Removable motor compartment for easy maintenance. |
| 220-240 / 110 volt machines available. |
| Quick and easy installation. |
The KL-90 Automatic feeder is designed to inject powder as an airborne dust into the combustion chamber. The pneumatic delivery system will provide a constant dose rate of treatment. Electronic timing units give an extensive time range, allowing the KL-90 to dose accurately across the whole spectrum of boiler plant.
Boiler fouling is a continuous process that is directly determined by the amount of fuel burnt. The flexibility of the SAPEC feeders allow us to ensure that the SAPEC treatment is always present in the combustion zone, where it can be effective. In a typical installation the treatment is injected into the boiler at 8 to 15 minute intervals thereby making the SAPEC addition a continuous process also.
The unit is free standing and can inject into pressures of up to 72 inches WG. Normally floor mounted it can deliver the treatment to a height of 40 ft.
The KL-90 injection machines are now manufactured under licence in South Africa.
For More Information Contact:
SAPEC INDUSTRIAL CHEMICALS LTD
239 West Wycombe Road.High Wycombe, Bucks,UK, HP12 3AS
Tel: +44 1494 535867
FAX: +44 1494 535868
Internet: sales@sapec.co.uk
|
|
KL-90
Automatic Injection Machines